Hasarlı
Amaçlanan performansla çalışıyor
Önceki sahiplerin sayısı
1
Brüt ağırlık
2.000 kilogram
Motor gücü
44,1 kW (60 hp)
Çekiş Tipi
4 Tekerlek Çekişli
Çalışma genişliği
1.200 mm
Kullanım
Ticari alanlarda çim biçme
Taşıma Ölçüleri (EnxBoyxYükseklik)
3050000 x 1310000 x 1290000 mm
Garanti
6 Months Manufacturer Warranty Remaining
Diğer bilgiler
The Bomford Flailbot 60hp is powered by a 2.2 turbo charged Perkins diesel engine. The tandem pump hydraulic system enables the machine to track over rugged terrain without losing power to the cutting head or implement.
The variable track frame measures 1310mm at its narrowest and then extends to 1810mm. Not only does this ensure better stability, but also helps to spread the weight of the machine when working on softer or wetter ground. Additionally, the Flailbot has a ground pressure of 0.285kg/cm2 which reduces ground compaction helping soil and ground structure. This coupled with the "hi-grip" rubber tracks ensure that the machine is able to undertake work where tractors and ATVs cannot.
The track tension is regulated automatically by the hydraulic system via a ram in each track assembly which removes the need for the operator to ensure track tension is maintained by more traditional methods of greasing the track frame to ensure the idler wheels are tight.
Each independent track speed can be individually reduced/increased which allows the machine to maintain a consistent tracking direction whilst traversing side slopes.
The multifunction remote control unit allows the operator to undertake all functions of the machine whilst maintaining a safe distance. This reduces the risk of slips, trips and falls for the operator as well as nullifying any risk of hand arm vibration symptoms. The remote signal is capable of operating up to a maximum of 150m.
The Flailbot has an in-built co-axial inclinometer sensor which will alert the operator of ground that is beyond the 55 degree limit by sounding the horn. If the same manoeuvre is attempted three times, the horn will sound and the machine will shut down and will require a re-start. Additionally, should there be any unfortunate occurrences with the operator (faints/falls), the remote control has a built in safety sensor that detects if the remote if inverted for too long or if it is subject to sudden impact, like someone falling, and will shut the machine down.
Machine will be fully PDI'd prior to departure.Diğerlerini göster 
3
Favori
Share
Aramayı kaydet
Report suspicious display